St-SVR 2000va Line Voltage Regulator High Voltage Oil Immersed Transformer High Voltage Transformer

• Current Type: AC
• Phase: Single Phase
• Frequency Characteristics: High Frequency
• Usage: SVC, DBW, JIW
• Frequency: Industrial Frequency
• Size: Small
• Model NO.: SVR2000
• Iron Core Shape: R
• Power Source: Switching Regulated Power Supply
• Application Range: Industrial and Mining Enterprises
• Load Loss: 7.0kw
• No-Load Loss: 1.2kw
• Transport Package: Standard Export Packing
• Specification: 500-2
• Trademark: OEM
• Origin: Zhejiang, China
• Production Capacity: 20000PCS/Month

Product Description

ST-SVR Lline Voltage Regulator 

Product Introduction

ST-SVR line voltage regulator is a device that keeps track of line voltage changes and automatically adjusts the transformation ratio of the device itself to ensure stable output voltage.
The input voltage can be automatically adjusted within the range of ±20%. It is especially suitable for lines with large voltage fluctuations or lines with large voltage drops. This feeder voltage regulator is installed in series in 6kV, 10kV, and 35kV lines. In the rear part, the line voltage is adjusted within a certain range to ensure the user's power supply voltage and reduce the line loss of the line.
In addition, the ST-SVR feeder automatic voltage regulator is also suitable for substations where the main transformer does not have the ability to adjust voltage. Install this type of voltage regulator on the outlet side of the transformer substation to ensure the bus voltage on the outlet side. It has a wide range of applications in the national rural power grid, urban power grid, oil field, coal, chemical industry, substation and other fields.

Main Feature
(1) The whole device has large capacity, low loss, small size, and easy installation and maintenance;
(2) Automatically adjust the three-phase on-load tap switch gear position by tracking the voltage change, which has reliable action and high voltage adjustment accuracy;
(3) The voltage reference, the action delay, the allowable range, and the limit of the number of times can be adjusted according to the needs, and the parameter setting is flexible and convenient;
(4) Display ST-SVR on-load tap-changer gear action times and current gear position, with indications of the highest and lowest gears;
(5) With the upper limit and lower limit protection of the gear position, the action time limit function, which effectively improves the reliability of the product;
(6) The controller has over-voltage rapid drop and under-voltage protection functions. When the line is in an over-voltage or under-voltage state, the controller automatically locks; to ensure the safe operation of the on-load tap-changer
(7) The controller adopts industrial-grade control chip, which has high reliability and strong anti-interference ability, which can adapt to the harsh outdoor environment;
(8) With RS485 communication interface, the parameters of the controller can be viewed and modified within 30m from the installation point through the wireless communication module.

Parameters

Environmental conditions
1 Altitude: ≤2000m
2 Ambient temperature: -25ºC~+45ºC
3 Relative humidity: less than 90%
4 Anti-pollution ability: Level III
5 Installation tilt: <2%
6 There is no dirty or corrosive medium around the device that seriously affects the insulation performance of the device, and there is no risk of fire and explosion in the workplace, and no severe vibration.
Note: When the working environment exceeds the above conditions, the user needs special instructions when ordering.

Voltage regulator controller
1 Working power supply: AC/DC 115-380V
2 Rated frequency: 50Hz
3 Maximum power consumption: 25W
4 Analog input: 2 voltages (0,250V)
5 Switch input: 10 empty contact inputs
6 Switch output: 2 ways (AC250V/380V l6A)
7 Measurement accuracy: voltage (0.5%)
8 Anti-interference level: meet the requirements of IEC61000-4:1995

 

Rated capacity	3150KVA(6kV)5000kVA(10kV),20000kVA(35kV)
Rated voltage	6kV,10kV,35kV
Frequency	50Hz
Voltage adjustment range	-20%~+20%
Gears	7-9gears
Connection group	Ya0
Transformer oil grades	25#, 45#
Cooling method	ONAN
Insulation level	LI60kV/AC25kV(6kV), LI75kV/AC35kV(10kV), LI200kV/AC85kV(35kV)
ST-SVR line pressure regulator adopts a fully sealed corrugated oil tank with oil temperature indicator and pressure release valve; the tank has a built-in single-phase voltage to provide sampling signals and working power for the controller;